By Sheryl Bushaw on Monday, 17 August 2015
Category: Slide-on Camper

Have truck sag Outback? Get StableLoad!

When you take your slide-on camper, campervan or pull a caravan off road into the Outback, you may experience sag in the rear of your truck.  To reduce truck sag during heavy hauling, many people jump to the conclusion that their truck is not already equipped to handle the added weight without costly suspension upgrades.  In reality, if your truck is equipped with upper or lower overload leaf springs, Torklift International offers a product that can unleash your truck’s maximum hauling potential that the factory engineers already equipped it with.  

It’s not magic, it’s StableLoad and this is how it works:

StableLoad Quick Disconnect engaged
(shown in yellow for contrast)

By preloading your truck’s factory overload springs, StableLoad keeps your truck or campervan suspension operating at it’s maximum stability.  Without StableLoads the truck’s suspension would have to sag significantly before the overload springs came into play to help stabilize the load.  StableLoad enables the factory overload springs to stabilize your load before this occurs.  

One of the main unique benefits of StableLoad is that it evenly distributes the weight of your truck, caravan or campervan’s load through your leaf springs and factory suspension as the truck’s engineers intended.  This dramatically reduces and helps eliminate rear end sag, body roll and up and down bouncing in the rear of your truck.  In this way, StableLoad makes a dramatic improvement in the overall handling characteristics of your truck when hauling heavy loads such as a slide-in camper, caravan or campervan.  


StableLoad engages and disengages
in seconds

As an added benefit, StableLoad Quick Disconnect for lower overload leaf springs gives your truck’s suspension an “on/off” switch.  To engage StableLoad to achieve your truck’s maximum suspension stability, simply slide the StableLoad wedges between your overload leaf spring and your standard leaf springs, lock a bolt into place with a pin and you’re set for heavy hauling.

To turn off Quick Disconnect StableLoad, simply reverse the process to return to your most comfortable ride setting.  

 If you’re looking for the most effective suspension stabilizer to haul your slide-in camper, caravan, or any heavy load, take a look at StableLoad for your vehicle.  But don’t take our word for it.

See what other folks had to say about StableLoad at the StableLoad challenge:

Find Your Adventure with StableLoad from Torklift International!

Contact us today to learn more:

Torklift International

1901 Fryar Ave Sumner, WA 98390

suppportau@torklift.com
www.torklift.com.au


Leave Comments